Instrument
VERTICAL AUTOCLAVE
It is used for sterilization under saturated steam pressure at any selected point between 5 to 20 p.s.i. (Optional adjustable with pressure control switch). These are double walled units with inner chamber (Boiler) made of 18 S.W.G. stainless steel and outer chamber is covered with M.S Lid is tightened by radial locking system. Fitted with neoprene rubber gasket, all systems are hydraulically tested up to 40 p.s.i., as a safety measure. All autoclaves are fitted with standard accessories such as water level indicator, pressure gauge, , steam release cock, spring loaded safety valve and heating element. Supplied complete with S.S. basket, cord and plug to work on 220/230 volts A.C. Supply. ALL DELUXE MODELS besides being fitted with STAINLESS STEEL/LID and having inner chamber made of s.s. and outer chamber stainless steel, are also fitted with VACUUM BREAKER as a SAFETY DEVICE. Provided with digital microprocessor based system for setting temperature, purge time, exhaust time etc. Autoclave is controlled with the settings on this controller
DIMENSIONS OPTIONAL ACCESSORIES
(a) 250x450 m.m.(10”X18”) (A) AUTOMATIC INDFOSS PIEZOSTAT(b) 300x500 m.m.(12”X20”) (B) Automatic low water level cut-off device
(c) 350x550 m.m.(14”X22”) (C) Automatic 0-60 minutes "GERMAN " Timer
(d) 450x600 m.m.(18”X24”) (D) Digital Temprature Display
(e) 550x750 m.m. (22”X30”) (E) Digital programmable graphic LCD Controller cum display
HORIZONTAL AUTOCLAVE
Construction: Triple walled construction inner chamber is made of high grade stainless steel sheet of SS-304 grade. The outer body is also made of thick stainless steel sheet. The boiler is made of S. Steel. The lid is made of thick steel sheet plate. The unit is duly fitted with highly efficient M.S. Painted Ring & radial locking system duly chrome plated. A three way valve or a multi port Valve made of stainless steel is installed for controlling the sterilization cycle. The pressure is adjustable from 5 psi to 20 psi; pressure is controlled by automatic pressure control switch. Fitted with water level indicator and vacuum breaker. The unit is fitted with temperature gauge, vacuum breaker and steam trap. The whole unit is mounted on a robust tubular stand made of MS duly painted with attractive stove enamel.
DIMENSIONS OPTIONAL ACCESSORIES
(A) 400 x 600 mm (16X24) (A) AUTOMATIC INDFOSS PIEZOSTAT(B) 400 x 1100 mm(16X44) (B) Automatic low water level cut-off device
(C) 500 x 900 mm (20X36) (C) Automatic 0-60 minutes "GERMAN " Timer
(D) 500 x 1200 mm (20X48) (D) Digital Temprature Display
(E) Digital programmable graphic LCD Controller cum display
B.O.D. INCUBATOR
Most versatile for Biochemical Oxygen Demand determinations. Castor wheel mounted cabinet is double walled with inner chamber S.S. and outer wall of M.S. Sheet duly powder coated. Triple walled back of the unit is fitted with two air circulation fans for maintaining temperature uniformity throughout the chamber; Fully view inner glass/Acrylic door permits inspection of specimens, without disturbing the same. Lock and key arrangement is provided in the double walled outer door. Unit is fitted with door operated illumination lamp inside the chamber. Refrigeration unit is formed by ISI marked compressor, The front panel is provided with separate indicator lamps for main, heating and incoming voltage. Supplied complete with 3 shelves, cord and plug to work on 220/230 A.C. supply. Temperature From 5°C to 80°C is controlled by MICRO PROCESSOR ELECTRONIC DIGITAL TEMPERATURE INDICATOR-CUM-CONTROLLER (PID) with an accuracy of ±0.5°C. Puff Insulation Graphic LCD display (Blue Screen) with thee facility of password protection PC connectivity (RS232 Port) as an optional Feature.
DIMENSIONS OPTIONAL ACCESSORIES
(A) 45 5 x 610 x 410 m.m (18"x24"x16") (A) Interior illumination with 3nos.flourscent tubes (temp. 10° to50°c)(B) 50 5 x 830 x 415 m.m. (20"x34"x17") (B) Automatic Voltage Stabilizer 3KVA. (TRIPLE RELAY)
(C) 570 x 875 x 550 m.m. (23"x35"x22") (C) Digital programmable GLCD Controller cum display
(D) 650 x 900 x 550 m.m. (26"x36"x22")
BACTERIOLOGICAL INCUBATOR
Most versatile for Biochemical Oxygen Demand determinations. Castor wheel mounted cabinet is double walled with inner chamber S.S. and outer wall of M.S. Sheet duly powder coated. Triple walled back of the unit is fitted with two air circulation fans for maintaining temperature uniformity throughout the chamber; Fully view inner glass/Acrylic door permits inspection of specimens, without disturbing the same. Lock and key arrangement is provided in the double walled outer door. Unit is fitted with door operated illumination lamp inside the chamber. Refrigeration unit is formed by ISI marked compressor, The front panel is provided with separate indicator lamps for main, heating and incoming voltage. Supplied complete with 3 shelves, cord and plug to work on 220/230 A.C. supply. Temperature From 5°C to 80°C is controlled by MICRO PROCESSOR ELECTRONIC DIGITAL TEMPERATURE INDICATOR-CUM-CONTROLLER (PID) with an accuracy of ±0.5°C. Puff Insulation Graphic LCD display (Blue Screen) with thee facility of password protection PC connectivity (RS232 Port) as an optional Feature.
DIMENSIONS OPTIONAL ACCESSORIES
(A) 45 5 x 610 x 410 m.m (18"x24"x16") (A) Interior illumination with 3nos.flourscent tubes (temp. 10° to50°c)(B) 50 5 x 830 x 415 m.m. (20"x34"x17") (B) Automatic Voltage Stabilizer 3KVA. (TRIPLE RELAY)
(C) 570 x 875 x 550 m.m. (23"x35"x22") (C) Digital programmable GLCD Controller cum display
(D) 650 x 900 x 550 m.m. (26"x36"x22")
EGG INCUBATOR
Outer wall is made up of M.S. sheet duly painted and inside of S.S. Temp. Range from ambient to 70°C is controlled by digital temperature indicator cum controller an accuracy of ± 0.5° C. The unit is provided with manual tilting device, so as to tilt the tray holding the eggs. To work on 220, 230 volts A.C. supply. Puff Insulation Graphic LCD display (Blue Screen) with thee facility of password protection (OPTIONAL).
DIMENSIONS OPTIONAL ACCESSORIES
(A) 50-250 eggs (A) Digital programmable Graphic LCD Controller cum display
ORBITAL INCUBATOR
Double walled construction. Outer body made of Mild Steel duly Powder Coated for longer durability. Inner chamber made of Stainless Steel with ribs to hold trays. Shaking platform also made of S. Steel accommodate 16 Flask of 500 ml. capacity. Temperature controlled by Digital Temp. Controller cum Indicator from 5 to 80°C, with an accuracy of ± 0.5 °C or Better. Temperature below ambient is maintained by a hermetically sealed compressor with complete unit placed beneath the chamber. Shaking speed can be controlled by digital Speed Regulator. A Stainless steel perforated tray is also provided for the use of upper portion of the chamber as a simple B.O.D. Incubator. An illumination lamp is also provided inside the chamber. Suitable to work on 220 /230 V, 50 Hz.Single Phase AC supply.
DIMENSIONS OPTIONAL ACCESSORIES
(A) 455 X 610 X 400 mm (4 QB FT) (A) Programmable Timer.(B) 505 X 830 X 415 mm (6 QB FT ) (B) Illumination with 4 numbers of 60 cm. Fluorescent tubes.
(C) 570 X 875 X 550 mm (10 QB FT) (C) Spare platform to accommodate other capacity of flask
(D) 650 x 900 x 550 m.m. (26"x36"x22") (D) Voltage Stabilizer (Blue Bird)
(E) Programmable Graphic LCD Controller cum display
WATER BATH INCUBATOR
It is a double walled unit with inside made of thick S.S. sheet and outer made of M.S. Steel duly powder coated prevents falling of condensed water droplets on the specimens. Heating is achieved through a immersion type heater and the temperature is controlled by digital temperature controller with an accuracy of ± 0.5°C. The bath has an oscillating tray riding on ball rollers oscillated through a geared variable speed motor. Shaking speed range is between 20-150 (can be change on request) cycles per minute. The shaking tray can either hold test tubes or Erlenmeyer flasks of 25 ml or 50 ml or 100 m or250 ml or 1000 ml. as ordered by the users. (Kindly mentioned the capacity of the flasks while ordering). Supplied complete with one shaking tray, paramedical cover, L-shaped thermometer cord and plug, to work on 220/230 volts A.C. supply. Available with heating arrangement only (having temperature range from ambient to 80°C) or with both heating and cooling arrangements (having temperature range from 5°C to 80°C).
DIMENSIONS OPTIONAL ACCESSORIES
(A) 225 x 275 x 150 m.m. (A) Spare shaking tray or test tube rack(B) 275 x 275 x 150 m.m. (B) Digital R.P.M. Meter
(C) 405 x 300 x 150 m.m (23"x35"x22") (C) Programmable Graphic LCD Controller cum display
MUFFLE FURNACE RECTANGULAR
Light weight with ceramic fiber wool insulation (instead of Brick insulation). The outer casing is made of double walled thick P.C.R.C. sheet, duly powder coated. Heating elements are made of KANTHAL “A-1'’ wire and backed by high temperature insulation, which avoids loss of energy. Temperature control unit consists of Energy Regulator, fitted in front of furnace with two pilot lamps. The apparatus is complete with one pyrometer, thermocouple, silver thermal fuse, main lead with power plug. To work on 220/230 volts or 400/440 volts A.C. Maximum Temp. is 1000°C and working temp. 950°C. For model of higher temperature the maximum temp. is 1200°C, 1450°C and working temp. 1150°C & 1400°C.
DIMENSIONS OPTIONAL ACCESSORIES
(A) 100 x 100 x 225 m.m. (A) Digital Temperature Indicator-cum-Controller extra. For 950°C (PID controller)(B) 125 x 125 x 250 m.m. (B) Digital programmable Graphic LCD Controller cum display
(C) 150 x 150 x 300 m.m.
(D) 200 x 200 x 300 m.m.
(E) 300 x 300 x 300 m.m.
CIRCULATING WATER BATH
A highly in demand instrument where water is required to be circulated to some external source through an F.H.P. pump. Most useful for circulating water to Abbe Refractometer, condenser coils etc. Temperature from 5°C to 80°C is controlled by digital temperature indicator cum controller with an accuracy of ± 0.5°C. Inner chamber made of S.S. and outer chamber made of M.S. Sheet duly powder coated. Inside bath size 8'’ x 9" x 10½’’ with a cover at side of size: 10'’x7'’ approx. To work on 220/230 Volts
DIMENSIONS OPTIONAL ACCESSORIES
(A) 10L (A) Programmable Graphic LCD Controller cum display (PID)(B) 12L
(C) 14L
(D) 21L
SEROLOGICAL WATER BATH
These units are double walled with inner chamber made up of S.S. sheet and outside of M.S. duly powder coated. The gap between the walls is filled puff insulation in order to avoid thermal loses. A drain plug is also fitted to the unit. The inner chamber fitted with immersion type heating element is covered with perforated removable diffuser tray. The cover is provided with the unit as a standard accessory. Temperature from 5°C to 80°C is controlled digital indicator cum controller with an accuracy of ±0.5°C. Supplied complete with 220/230 volts A.C. supply.
DIMENSIONS OPTIONAL ACCESSORIES
(A) 300 x 250 x 175 m.m. (for 2 racks) (A) Stirring arrangement with 1/20 HP motor & speed regulator(B) 330 x 300 x 175 m.m. (for 4 racks) (B) Programmable Graphic LCD Controller cum display (PID)
(C) 455 x 300 x 175 m.m. (for 6 racks)
(D) 605 x 300 x 175 m.m. (for 8 racks)
FUME HOOD
Designed so as to throw-out al toxic/ harmful vapours, thus protecting costly instruments and the person working in the lab. Working table top is fitted with acid/alkali resistant tiles/ Stain Steel and a small wash basin with connections provided for inlet and outlet of water. The front door moves vertically up and down with concealed counter balanced weight. The unit if fitted with fluorescent light and a gas cock for gas/air supply. The space under the work station can be provided with storage compartments for storage purpose. The front facing panel is fitted with 15/5 Amp socket with switches for exhaust system and fluorescent light. TO WORK ON 220/230 volts A.C. Supply
DIMENSIONS OPTIONAL ACCESSORIES
(A) 2' x 2' x 2' (A) PVC Fume Duct (per ft.)(B) 3' x 2' x 2' (B) Inner chamber FRP/ S.S. (Per FT.)
(C) 4' x 2' x 2’ (C) Lining on Working walls extra (Per FT.)
(D) 6' x 2’ x 2' (D) Programmable Graphic LCD Controller cum display (PID)
LAMINAR FLOW CABINET (HORIZONTAL)
Designed so as to meet the requirements of US Federal Standard 209 B (BS 5295) providing particle free air to meet class 100 (Class conditions.. The work table is made of Stainless Steel at top. Side panels are made out of thick transparent UV resistance 6mm acrylic sheet. The unit is fitted with pre - filter and HEPA Filter. Air is drawn through pre-filter and is made to pass through highly effective HEPA (High Efficiency Particular Air) filters having efficiency rating as high as 99.99% with cold DOP and 99.97% with hot DOP, thus retaining all air-borne particles of size 0.3 micron and larger. Using a dynamic machine, the blower and motor assembly is statically and dynamically balanced ISI MARKED Motor of 1/5 H.P. capacity operates with minimum noise level. The working area is illuminated by fluorescent lighting fitted to the unit. Height of the working table provides comfortable ‘SIT DOWN” working position for the operator. To work on 220/230 volts A.C. supply. Supplied complete with S. Steel table top, HEPA filters pre-filter and fluorescent illumination, UV light & Gas Burner
DIMENSIONS OPTIONAL ACCESSORIES
(A) 2' x 2' x 2' (A) Programmable Graphic LCD Controller cum display (PID)(B) 3' x 2' x 2'
(C) 4' x 2' x 2’
(D) 6' x 2’ x 2'
LAMINAR FLOW CABINET (VERTICAL)
Designed so as to meet the requirements of US Federal Standard 209 B (BS 5295) providing particle free air to meet class 100 (Class conditions.. The work table is made of Stainless Steel at top. Side panels are made out of thick transparent UV resistance 6mm acrylic sheet. The unit is fitted with pre - filter and HEPA Filter. Air is drawn through pre-filter and is made to pass through highly effective HEPA (High Efficiency Particular Air) filters having efficiency rating as high as 99.99% with cold DOP and 99.97% with hot DOP, thus retaining all air-borne particles of size 0.3 micron and larger. Using a dynamic machine, the blower and motor assembly is statically and dynamically balanced ISI MARKED Motor of 1/5 H.P. capacity operates with minimum noise level. The working area is illuminated by fluorescent lighting fitted to the unit. Height of the working table provides comfortable ‘SIT DOWN” working position for the operator. To work on 220/230 volts A.C. supply. Supplied complete with S. Steel table top, HEPA filters pre-filter and fluorescent illumination, UV light & Gas Burner
DIMENSIONS OPTIONAL ACCESSORIES
(A) 2' x 2' x 2' (A) Programmable Graphic LCD Controller cum display (PID)(B) 3' x 2' x 2'
(C) 4' x 2' x 2’
(D) 6' x 2’ x 2'
BIOLOGICAL SAFETY CABINET/ SAMPLING BOOTH
The work table is made of Heavy gauge S.S. sheet and is fitted with U.V. Germicidal Light, static pressure Manometer, Exhaust System (suitable for 6 feet duck) and Virus Burn Out Unit. Side panels are made out of thick transparent plexi glass duly framed. The unit is fitted with pre-filter and HEPA Filter. Air is drawn through pre-filter and is made to pass through highly effective HEPA (High Efficiency Particular Air) filters having efficiency retaining all air-borne particles of size 0.3 micron and larger. Using a dynamic balancing machine, the blower and motor assembly is statically and dynamically balanced. Motor of 1/4 H.P. capacity operates with minimum noise level. The working area is illuminated by fluorescent lighting fitted to the unit. The height of the working table provides a comfortable “SIT DOWN” working position for the operator. In addition to the above futures of a standee Vertical Laminar Flow Bench, the “APS” Bio-safe cabinets have arrangements for re-circulating a part of the air thus creating highest level of clean air. The unit is also convertible to the conventional vertical laminar flow bench with downward air flow by lifting the sliding front door upwards. Air is sucked through the pre-filter and the excess air is thrown out from the top. Through a HEPA filter of size 1' x 1' x 6'’. Supplied with glove ports and gauntlets, HEPA filter, pre-filter, U.V. light and fluorescent light.
**SIZE CAN BE DESIGND AS PER THE CUSTOMER REQUIREMENT*****
DIMENSIONS OPTIONAL ACCESSORIES
(A) 3' x 2' x 2' (A) Programmable Graphic LCD Controller cum display (PID)(B) 4' x 2' x 2’
(C) 6' x 2’ x 2'
PLANT GROWTH CHAMBER
It has outer wall made of M.S. Sheet duly powder coated and inner wall made up of heavy gauge S.S. Sheet. The gap between inner and outer wall is filled with puff insulation to avoid thermal loss. Besides outer double walled door, a full view inner glass door allows inspection of test samples without disturbing the inner chamber conditions. Unit is supplied with three adjustable perforated shelves. Temperature range from 5°C to 50°C (Can be changed as per customer requirement) with accuracy of ± 0.5°c is controlled by DUAL SETTING Digital Temperature indicator-cum-controller so as to set two different temperatures for Day and Night. Exterior illumination with fluorescent tubes fitted on both sides of the chamber accounts for artificial day light, and the cyclic illumination conditions are regulated by automatic 0-24 hrs. Timer, when all the tubes are on temperature from 15°C to 50°C ±0.5°C can be from ambient to 50°C and the same is achieved by means of injecting steam. Arrangements for increasing the humidity are provided and not for decreasing.
DIMENSIONS OPTIONAL ACCESSORIES
(A) 505 x 830x415 m.m. (A) Digital Humidity Controller(B) 570 x 875 x 550 m.m. (B) Programmable Graphic LCD Controller cum display (PID)
(C) 650 x 900 x 550 m.m.
SEED GERMINATOR (DUAL CHAMBER)
Most suitable for conducting various experiments on a variety of seeds under different conditions of temperature and humidity. Atmospheric conditions are created within the chamber to perform different experiments without gone onto the field. The double walled unit has inner chamber made up of S.S. and outer chamber of M.S. Sheet duly powder coated.Fitted with heating and cooling system in both the chambers. so as to Control Temperature from 5°C to 50°C ± 1°C in both chambers (Supplied with 14 trays). Complete with cord and plug to work on 220/230 V. A.C. supply.
DIMENSIONS OPTIONAL ACCESSORIES
(A) 555(w) x 910 (H) x 605 (D) (22"x36"24") (A) Exterior illumination arrangement (for each chamber)(B) Automatic 0-24 hrs timer (for each chamber)
(C) Digital Humidity Control Arrangement 45% to 95% ± 3% RH (f.e.c.)
(D) Automatic Voltage Stabilizer 3.0 KVA (TRIPLE RELAY) (f.e.c.)
(E) Programmable Graphic LCD Controller cum display (PID)
(F) SEED GERMINATOR (SINGLECHAMBER) IS AVAILABLE
HUMIDITY CONTROL CABINET
Suitable for carrying out different quality control tests under controlled conditions of temperature and humidity. Inner chamber consists of S.S. and outer wall of M.S. sheet duly powder coated. The gap between the outer and inner wall is filled with puff insulation to prevent thermal losses. A self cooler air circulation fan is fitted to maintain uniform temperature and humidity conditions throughout the chamber Temp. Range from 5°C above to 60°C (both heating and cooling) is controlled by digital temperature indicator cum controller with an accuracy of ±0.5°C. Humidity is controlled through an imported HUMIDISTAT thus controlling the desire set humidity range from atmospheric humidity to 95% ± 3%..
DIMENSIONS OPTIONAL ACCESSORIES
(A) 455 (w) x 710 (H) x 455 (D) mm (A) Programmable Graphic LCD Controller cum display (PID)(B) 605(w) x 605 (H) x 605 (D) mm
(C) 605(w) x 910 (H) x 605(D) mm
ICE FLAKING MACHINE
USP has revolutionized the ice maker, to provide state-of-the art dimensional and operational features. Today with its new aesthetics you may proudly display your ice maker. At the same time, the reduced dimensions allow you to place it under the counter or wherever you prefer, with the utmost freedom even with water drain constraints. Daily production and storage capacity havebeen optimized in relation to overall dimensions, while innovative features create and allow the maintenance of the highest food safety standards.
At a Glance:
Hygienic ice with maximum cooling capacity
Lowest power consumption
Hermetically sealed air cooled refrigeration system
Eco Friendly refrigerant
Fully Automatic control system
Corrosion free stainless steel interiors
Rounded corners of the interiors for easy cleaning
Geared Motor with thermal protection
DIMENSIONS OPTIONAL ACCESSORIES
(A) 30Kg. /24Hr (A) Programmable Graphic LCD Controller cum display (PID)(B) 50Kg. /24Hr.
(C) 85Kg. /24Hr.
(D) 100Kg. /24Hr.
(E) 150Kg. /24Hr.
(F) 200Kg. /24Hr.
DEEP FREEZER (VERTICAL )
Double walled with inner chamber made of S.S. and outer of thick PCRC sheet duly enamel painted. Temperature range from 10°C to -86°C is achieved by hermetically sealed compressor. The gap between the inner and outer wall is filled with high grade PUF Insulation to avoid thermal loss. Body is mounted on a sturdy angle iron frame and is mounted on castor wheels. Unit is fitted with Micro Processor Digital Temperature Indicator-cum controller. Horizontal Chest type models are supplied in a single compartment whereas vertical models are supplied with three storing shelves.
SINGLE AND DOUBLE DOOR MODELS ARE AVAILABLE
ALL MODELS ARE FABRICATED IN STAINLESS STEEL BODY 316 GRADE
DIMENSIONS OPTIONAL ACCESSORIES
(A) 4 Cuft. (A) Programmable Graphic LCD Controller cum display (PID)(B) 6 Cuft..
(C) 10 Cuft.
(D) 12 Cuft..
VACUUM OVEN
These are double walled units with outer made of M.S. Sheet duly powder painted and inner made of heavy gauge S. Sheet. Gap between the two walls is duly filled with puff insulation to avoid thermal loss. Temperature range from ambient to 150°C is controlled by Digital Temperature Controller with an accuracy of ± 1°C. It is capable of with standing a high vacuum. Provided with vacuum gauge, see through transparent window of toughened glass and one shelf. To work on 220/230 Volts A.C. supply.
DIMENSIONS OPTIONAL ACCESSORIES
((A) Round : 200 x 250 m.m. (8"x10") (A) Vacuum pump(B) Round : 250 x 300 m.m. (10"x12"). (B) Programmable Graphic LCD Controller cum display (PID)
UNIVERSAL OVEN
These are sturdy double walled units with outer chamber made of M.S. sheet duly powder coated / painted or stainless steel with inner made up of anodized aluminum or S.S. sheet. The gap between inner and outer chamber is filled with puff insulation to avoid thermal losses. Beaded heating elements are placed in ribs, at bottom and sides. Inner chamber is provided with ribs for adjusting perforated shelves to convenient Temp. Temperature is controlled by digital temperature indicator cumcontroller from ambient to 250°C ± 0.5°C. An - L shaped prismatic thermometer is fitted to the unit for reading the chamber temperature. Air ventilators are also provided on the sides of the unit. To work on 220/230 volts A.C.
DIMENSIONS OPTIONAL ACCESSORIES
(A) 300 x 300 x 300 m.m. (A) Programmable Graphic LCD Controller cum display (PID)(B) 355 x 355 x 355 m.m.
(C) 455 x 455 x 455 m.m.
(D) 455 x 455 x 605 m.m.
(E) 605 x 605 x 605 m.m.
(F) 605 x 455 x 910 m.m.
(G) 605 x 605 x 910 m.m.
FREEZE DRYER (LYOPHILIZER)
*It is used for pro-reservation of Blood Plasma, Plants etc. without damaging their
Cell structure, with cooling condenser, vacuum drum and pump in steel Cabinet.
*match the green environmental protection of international standard
*big openings of the cold trap, without coil pipe inside, have pre-freeze faction
*Imported refrigerant compressor, high capability of water-capture, low noisy
*all stainless steel wall, can bear corrosion, clean easily;
*transparence the clock cover type dry room, safe, keep a view
*stainless steel sample holder, can option the space between layers
*small cubage, convenient operation
*Valve with nitrogen is optional.
*Vacuum degree : <10 Pa
*Freeze-dry acreage : 0.07-0.12 sq. m
*Water-Capture Capability : 2-3Kg/24h
CAPACITY
(A) 3 liter(B) 5liter
VACUUM PUMP (OIL FREE)
Max. Vacuum : 675 mm of Hg
Horse Power : 1/4 P
Max. press(PSI g) : 60
Net Wt.
: 12.5 Kg
FLOW RATE (L/Min)
(A) 45(B) 90
pH METER MICROPROCESSOR BASED
Make
: AHN GmbH
Model
: AM-58PH
pH Range
: 0.00 to 14.00 pH
pH Resolution
: ±0.01pH
pH Accuracy
: ±0.01pH
mV Range
: 0 to +1999mV
mV Accuracy
: ±1mV
Temperature Range
: 0 to 100°C
Temperature Accuracy
: ±1°C
Calibration Points
: 2 points
pH Buffer Options
: NIST ( pH 4.00 / 6.86 / 9.18 ) or
USA (pH4.01 / 7.00 / 10.00 )
Temp. Compensation
: 0 t o 100oC,Manual o r Automatic
Power Requirements
: DC 9V, using AC Adaptor 220 VAC, 50hz
Dimensions
: 210 ( L ) mm x 205 ( W ) mm x 65 ( H ) mm
Weight
: 1.75 kg
Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit.
Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit.